Netgear WG302 WG302v1 Reference Manual - Page 47
Access Point Name NetBIOS, The IP Address, Spanning Tree Protocol
UPC - 606449030365
View all Netgear WG302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302 Figure 3-11: IP Settings menu • Access Point Name (NetBIOS) Enter a new name for the wireless access point and click Apply to save your changes. • The IP Address The wireless access point is shipped preconfigured with its DHCP client disabled and with the following private static IP addresses: - IP Address - 192.168.0.228 - IP Subnet Mask - 255.255.255.0 - Gateway - 0.0.0.0 - Primary and Secondary DNS Servers - 0.0.0.0 If your network has a requirement to use a different IP addressing scheme, you can make those changes in this menu. These settings are only required if the "Use this IP address" radio button is chosen. Remember to click Apply to save your changes. • Spanning Tree Protocol Basic Installation and Configuration September 2004 3-24