Netgear WG602 WG602v3 User Manual - Page 16

Reference Manual for the NETGEAR 54 Mbps Wireless Access Point WG602v3 System Requirements Before installing the WG602v3, make sure your network meets these requirements: • A hub, switch, or Cable/DSL router with an available 10/100 Mbps Ethernet port • A Category 5 UTP straight through Ethernet cable with RJ-45 connector included in the package, or one like it • A 100-240 V, 50-60 HZ AC power source • A Web browser for configuration such as Microsoft Internet Explorer 5.0 or above, or Netscape Navigator 4.78 or above • At least one Pentium class computer (or equivalent) with the TCP/IP protocol installed • Other 802.11b or 802.11g-compliant devices What's In the Box? The product package should contain the following items: • NETGEAR WG602v3 54 Mbps Wireless Access Point • Power adapter and cord (12Vdc, 1.2A) • Straight through Category 5 Ethernet cable-10 feet (3.04 m) • Printed WG602v3 54 Mbps Wireless Access Point Installation Guide • Resource CD for the NETGEAR 54 Mbps Wireless Access Point WG602v3 - Reference Manual for the NETGEAR 54 Mbps Wireless Access Point WG602v3 (202-10060-02)-this manual - Windows TCP/IP and Networking Tutorials - Animated Install Assistant - Soft copy of the WG602v3 54 Mbps Wireless Access Point Installation Guide • Support Information card • Warranty and Registration card Contact your reseller or customer support in your area if there are any wrong, missing, or damaged parts. You can refer to the Support Information Card for the telephone number of customer support in your area. You should keep the Support Information card, along with the original packing materials, and use the packing materials to repack the WG602v3 if you need to return it for repair. 2-4 Introduction 202-10060-02, February 2005