Netgear WMS5316-Wireless Reference Manual - Page 19
Advanced Wireless Settings for Access Point Groups, Wireless > Basic > RF Management
View all Netgear WMS5316-Wireless manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
ProSafe 16 AP Wireless Management System WMS5316 point that supports wireless-n mode run in b/g mode in order to support clients that do not support wireless n technology. • 2.4GHz or 5GHz band selection: This selection affects only dual band access points that can be set to only one band at a time. You can use this field to specify which band the access point should use. Note: For dual concurrent access points, both radio modes are enabled by default. 4. Click Apply so that your changes take effect. Advanced Wireless Settings for Access Point Groups This screen is for advanced users who wish to control the WLAN settings of the access points manually. To manually specify the WLAN parameters for access points: 1. On the Configuration tab, select Wireless > Basic > RF Management, and disable the Central RF Management on the Wireless Settings screen. This prevents the wireless management system from automatically using RF management and adjusting power and channel settings for the access point group. 2. On the Configuration tab, select Wireless > Advanced > Wireless Settings: 3. Specify the settings in this screen (see Table 1, Advanced Wireless Settings for a description of the fields). Wireless Configuration 19