Netgear WNR1000-2VCNAS WNR1000v2 Setup Manual - Page 28

Enter Client's PIN, shares the same security settings as the router.

Get Netgear WNR1000-2VCNAS PDF manuals and user guides View all Netgear WNR1000-2VCNAS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

- Then, enter this PIN in the Enter Client's PIN field provided on the router and click Next. You have 4 minutes to enable WPS on the router using this method. Figure 16 Using either method, the client wireless device will attempt to detect the WPS signal from the router and establish a wireless connection in the time allotted. • If no connection is detected: - WPS did not establish a secure connection with a wireless device. - Neither the SSID nor the WPA/WPA2 security settings were configured on the router. • If a connection is established: - The router WPS screen displays a message confirming that the wireless client was successfully added to your wireless network. - The router generated an SSID, implemented WPA/WPA2 wireless security (including a PSK security password), and broadcast these settings to the client; the client now shares the same security settings as the router. If the router was already configured manually, and either WPS/PSK or WPA2/PSK security enabled and a PSK security password selected, then the client now shares these same security settings. 4. Note your SSID and WPA/WPA2 PSK security password (whether previously set or generated) for your wireless network. Configuring Your Wireless Network 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
Configuring Your Wireless Network
24
–
Then, enter this PIN in the
Enter Client’s PIN
field provided on the router and click
Next
. You have 4 minutes to enable WPS on the router using this method.
Using either method, the client wireless device will attempt to detect the WPS signal from the
router and establish a wireless connection in the time allotted.
•
If no connection is detected:
–
WPS did not establish a secure connection with a wireless device.
–
Neither the SSID nor the WPA/WPA2 security settings were configured on the router.
•
If a connection is established:
–
The router WPS screen displays a message confirming that the wireless client was
successfully added to your wireless network.
–
The router generated an SSID, implemented WPA/WPA2 wireless security (including
a PSK security password), and broadcast these settings to the client; the client now
shares the same security settings as the router.
4.
Note your SSID and WPA/WPA2 PSK security password (whether previously set or
generated) for your wireless network.
Figure 16
If the router was already configured manually, and either WPS/PSK or
WPA2/PSK security enabled and a PSK security password selected, then
the client now shares these same security settings.