Netgear WNR1000-2VCNAS WNR1000v2 Setup Manual - Page 9
Router Label, Positioning Your Wireless Router
View all Netgear WNR1000-2VCNAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
1. WPS button - Turns Push 'N' Connect (WPS) security on and off. When wireless security is enabled, the Push 'N' Connect LED on the front of the wireless router is solid green. See "Push 'N' Connect" on page 3. 2. Wireless On/Off button - Turns the Wireless network on and off. When the Wireless network is enabled, the Wireless LED on the front of the router is solid green. See "Wireless" on page 3. Router Label The label on the bottom of the wireless router shows the router's MAC address, serial number, security PIN, and factory default login information. The ports on the router are color-coded to distinguish your Internet port from the other four ports that connect to the wired computer(s) on your Local Area Network (LAN). Figure 4 Positioning Your Wireless Router The wireless router lets you access your network from virtually anywhere within the operating range of your wireless network. However, the operating distance or range of your wireless connection can vary significantly depending on the physical placement of your router. For example, the thickness and number of walls the wireless signal must pass through might limit the range. For best results, place your router: Getting to Know Your Wireless Router 5