Netgear WPN824EXT WPN824EXT User Manual - Page 48
Get Dynamically From ISP Gateway, Repeater MAC, Address, Base Station MAC Address, Repeater IP Address
UPC - 606449055146
View all Netgear WPN824EXT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
RangeMax WiFi Range Extender WPN824EXT User Manual • If you are using DHCP, the Get Dynamically From ISP Gateway radio button in the Internet IP Address section of the Basic Settings screen should be selected for all AP devices in the IP Address Source portion. To set up the repeater configuration shown in Figure 4-2: 1. Configure the operating mode of AP1 (the WiFi range extender in Figure 4-2) as a wireless base station with the MAC addresses of AP2 and AP3 in the first two Repeater MAC Address fields. 2. Configure the operating mode of AP2 and AP3 as wireless repeater with the MAC address of AP1, the WiFi range extender, in the Base Station MAC Address field. 3. Configure AP2 and AP3 to have a static IP address in their Repeater IP Address fields. 4. Verify connectivity across the LANs. A computer on any wireless or wired LAN segment of the WiFi range extender should be able to connect to the Internet or share files and printers with any other wireless or wired PC or server connected to any of the other APs. In the scenario shown, a WiFi range extender can also be used as one of the "child" APs. Configure the WiFi range extender's Wireless Repeating Function settings as described for AP2 or AP3. Note: If a WiFi range extender is used as a wireless repeater AP as shown in Figure 4-2 on page 4-3, you might need to change other configuration settings. In particular, you should disable the DHCP server function on the wireless repeater APs. 4-4 Advanced Settings and Features v1.0, April 2008