Netgear XAV5004 XAV5004 User Manual - Page 9
Connecting Devices to the XAV5004, The Powerline LED is lit. - qos
View all Netgear XAV5004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
XAV5004 Powerline AV 500 Adapter User Manual Connecting Devices to the XAV5004 You can connect multimedia devices, such as media servers, storage devices, gaming consoles, video players, or internet telephones to the four Ethernet ports on the XAV5004. When you are connecting peripheral devices to the XAV5004, keep in mind how the devices will be used so that each device has the appropriate Quality of Service (QoS) priority (see Set Up Quality of Service (QoS) on page 16). To connect devices to your XAV5004, follow these steps: 1. Use an Ethernet cable to connect each peripheral device to an Ethernet port on the XAV5004. One Ethernet cable is provided with your XAV5004. Figure 4. Connecting devices to an XAV5004 Powerline adapter 2. When all peripheral devices are connected, connect the XAV5004 power cord into the unit and into a power outlet. 3. Wait up to 80 seconds for the XAV5004 to be recognized by the Powerline network. Check to see that: a. The Power LED is solid green. b. The Powerline LED is lit. c. The Ethernet LED is on or blinks. Chapter 1. Installation and Basic Configuration | 9