Nikon S220 S220/225 User's Manual - Page 146
Error Messages - coolpix battery replacement
UPC - 018208261505
View all Nikon S220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Error Messages The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them. Display O (blinks) B N Battery exhausted. P Battery temperature high Q (● blinks red) P Please wait for the camera to finish recording. N Memory card is write protected. P This card cannot be used. P This card cannot be read. P Card is not formatted. Format card? No Yes Problem Clock not set. Battery running low. Battery exhausted. Solution Set clock. Prepare to charge or change battery. Charge or change battery. Battery temperature is high. Camera cannot focus. Camera cannot perform other operations until recording is complete. Write-protect switch is in "lock" position. Turn off camera, and allow battery to cool down before resuming use. After 5 seconds, this message will disappear, the monitor will turn off, and the power-on lamp and flash lamp will blink rapidly. After the lamps blink for three minutes, the camera will turn off automatically. Pressing the power switch also turns off the camera. • Refocus. • Use focus lock. Wait until message clears from display automatically when recording is complete. Slide write-protect switch to "write" position. Error accessing memory card. • Use approved card. • Check that connectors are clean. • Confirm that memory card is correctly inserted. Memory card has not been formatted for use in COOLPIX S220/S225. Choose Yes and press the k button to format card, or turn camera off and replace card. A 115 12 12 15 24, 25 101 25 19 129 18 18 19 Technical Notes 134