Nikon S710  S710 User's Manual - Page 25

First Steps Charging the Battery The CHARGE lamp status and description of each status are as follows. CHARGE lamp Blinks Glows Flickers Description Battery recharging. Battery fully charged. • Battery not correctly inserted: Remove and reinsert the battery, being careful to insert it at a low angle. • Operating temperature range exceeded: Use the charger inside the designated temperature range (5 to 35 °C / 41 to 95 °F). • Battery malfunction: Stop charging immediately, unplug the charger, and take both the battery and charger to your retailer or Nikon service representative. 3 Unplug the charger. Remove the battery and unplug the charger. B Note on the Battery Charger The supplied battery charger is for use only with a Rechargeable Li-ion Battery EN-EL12. Do not use with incompatible batteries. Be sure to read and follow the warnings for the battery charger on pages iii and iv before using the battery charger. B Note on the Battery • Before using the rechargeable battery, be sure to observe the precautions described for "WARNINGS" in "For Your Safety". • Be sure to read and follow the warnings for the battery on page iii and the section, "The Battery" (A 136), before using the battery. • Be sure to charge the battery every 6 months even if you don't use the battery for a long period of time. Before storing the battery, use it up. C Note on AC power supply To power the camera continuously for extended periods, use the AC Adapter EH-62F (available separately from Nikon) (A 133). Do not, under any circumstances, use another make or model of AC adapter. Failure to observe this precaution could result in overheating or in damage to the camera. 13