Nokia 002J6D1 User Guide - Page 83
Video settings
View all Nokia 002J6D1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Camera ● Switch video light on or Switch video light off If you select a new scene, the colour and lighting - Switch the video light on or off (video mode settings are replaced by the selected scene. You can only). change the setup settings after selecting a scene if ● White balance ( ) - Select the current lighting needed. condition. This allows the camera to reproduce colours more accurately. Video settings ● Exposure compensation ( ) (image only) - If you are shooting a dark subject against a very light background, such as snow, adjust the exposure to +1 or +2 to compensate for the background brightness. For light subjects against a dark background, use -1 or -2. ● Sharpness ( ) (image only) - Adjust the sharpness of the image. ● Contrast ( ) (image only) - Adjust the difference between the lightest and darkest parts of the image. ● Light sensitivity ( ) (image only) - Increase the light sensitivity in low light conditions to avoid too dark images. The screen display changes to match the settings you make. To change the main settings, in the video mode, select Options > Settings and from the following: ● Video quality - Set the quality of the video clip. Select Sharing, if you want to send the video clip using a multimedia message. The clip is recorded with QCIF resolution, in 3GPP format, and the size is limited to 300 kB (approximately 30 seconds). You may not be able to send video clips saved in the MPEG-4 format in a multimedia message. ● Record location - To add GPS location coordinates to each file, select On. Receiving the GPS signal may take time or the signal may not be available. ● Audio recording - Select whether to record sound. ● Add to album - Add the recorded video clip to an The available settings vary depending on the selected album in Photos. camera. ● Show captured video - Select to view the first The setup settings are shooting-mode specific. frame of the recorded video clip after the recording Switching between the modes does not reset the stops. To view the entire video clip, select Play from defined settings. the active toolbar (main camera) or Options > The setup settings return to the default settings when you close the camera. Play (secondary camera). ● Default video name - Enter the default name for captured video clips. 83