NordicTrack 9600 El Trainr Elliptical Uk Manual - Page 6

How To Assemble The Elliptical Trainer

Get NordicTrack 9600 El Trainr Elliptical PDF manuals and user guides View all NordicTrack 9600 El Trainr Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

HOW TO ASSEMBLE THE ELLIPTICAL TRAINER Assembly requires two persons. Set the elliptical trainer in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly can be completed using the included hex keys. 1. Lift the Left Handlebar Arm (17) to the position shown. Attach the Left Handlebar Arm to the Left 1 Handlebar (19) with two 3/8" x 5/8" Shoulder Screws (100). 20 19 Attach the Right Handlebar Arm (not shown) to the Right Handlebar (20) in the same way. 100 17 2. Have another person hold the Upright (2) in the position shown. Connect the Lower Power Wire (96) to the Upper Power Wire (97). Connect the Lower CATV Cable (102) to the Upper CATV Cable (101). Connect the Lower Battery Wire (77) to the Upper Battery Wire (78). Connect the Lower Controller Wire (80) to the Upper Controller Wire (79). Attach the Upright (2) to the Frame (1) with four 3/8" x 1 1/4" Button Head Screws (48) and four 3/8" Star Washers (85). Make sure that no wires are pinched between the Upright and the Frame. 2 48 85 97 96 2 48 85 78 48 79 85 101 77 80 1 102 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
5
Assembly requires two persons.
Set the elliptical trainer in a cleared area and remove all packing materials. Do
not dispose of the packing materials until assembly is completed.
Assembly can be completed using the in-
cluded hex keys.
H
OW
T
O
A
SSEMBLE
T
HE
E
LLIPTICAL
T
RAINER
1.
Lift the Left Handlebar Arm (17) to the position
shown. Attach the Left Handlebar Arm to the Left
Handlebar (19) with two 3/8” x 5/8” Shoulder
Screws (100).
Attach the Right Handlebar Arm (not shown) to the
Right Handlebar (20) in the same way.
2.
Have another person hold the Upright (2) in the po-
sition shown. Connect the Lower Power Wire (96)
to the Upper Power Wire (97). Connect the Lower
CATV Cable (102) to the Upper CATV Cable (101).
Connect the Lower Battery Wire (77) to the Upper
Battery Wire (78). Connect the Lower Controller
Wire (80) to the Upper Controller Wire (79).
Attach the Upright (2) to the Frame (1) with four
3/8” x 1 1/4” Button Head Screws (48) and four 3/8”
Star Washers (85).
Make sure that no wires are
pinched between the Upright and the Frame.
17
1
2
48
48
85
97
96
77
79
80
102
2
1
100
19
20
101
78
85
48
85