NordicTrack C 1270 Pro Treadmill English Manual - Page 13
When You Turn On The Power.
View all NordicTrack C 1270 Pro Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
8. Set the console assembly (F) face down on a soft surface to avoid scratching the console assembly. Remove and save the four 1/4" x 1/2" Screws (4). 8 4 F 4 9. Hold the console assembly (F) near the Pulse Crossbar (93). See the inset drawing. Connect the pulse wires (G, H). The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Next, insert the two pulse wires (G, H) into the console assembly (F) as you set the console assembly onto the brackets on the Handrails (86); do not pinch any wires. Attach the console assembly (F) with the four 1/4" x 1/2" Screws (4) that you removed in step 8 and four 1/4" Star Washers (27); do not fully tighten the Screws yet. 9 F 86 27 4 G 86 93 H 27 4 G H 13