NordicTrack C 1270 Pro Treadmill English Manual - Page 16
Left Bottom Handrail Cover 85 in the same
View all NordicTrack C 1270 Pro Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
15. Identify the Right Handrail Cover (92). Set the Right Handrail Cover on the right Handrail (86). Start two #8 x 3/4" Truss Head Screws (23) into the bottom of the Right Handrail Cover; do not fully tighten the Truss Head Screws. Next, slide the Right Handrail Cover (92) forward until it rests against the console assembly (F). Then, tighten the two #8 x 3/4" Truss Head Screws (23); do not overtighten the Truss Head Screws. Then, attach the Right Bottom Handrail Cover (84) with two 8 x 3/4" Truss Head Screws (23). Attach the Left Handrail Cover (79) and the Left Bottom Handrail Cover (85) in the same way. 15 79 86 23 85 23 F 92 23 86 23 84 16. Note: If the treadmill is assembled on a smooth surface, it may roll forward during this step. Raise the Frame (56) to the upright position. IMPORTANT: Do not raise the Frame past the vertical position. Have a second person hold the Frame until step 18 is completed. Remove the two 5/16" x 3/4" Screws (31) from the Latch Crossbar (38). Orient the Latch Crossbar (38) as shown. Make sure that the "This side toward belt" sticker (K) is facing the treadmill. Attach the Latch Crossbar to the brackets on the Frame (56) with the two 5/16" x 3/4" Screws (31) and two 5/16" Star Washers (11). 16 11 31 56 Brackets 38 K 11 31 16