NordicTrack C 1270 Pro Treadmill English Manual - Page 14

Damaged When You Turn On

Get NordicTrack C 1270 Pro Treadmill PDF manuals and user guides View all NordicTrack C 1270 Pro Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

10. Insert the Upright Wire (81) through one looped tie (I) and insert the console wire (J) through the 10 other tie on the console assembly (F). Connect the Upright Wire (81) to the console wire (J). The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie from the Upright Wire. Pull the ties (I) tight around the Upright Wire (81) and the console wire (J) and cut off the end of the tie. F J 81 I I 11. Tighten two #8 x 1" Screws (50) into the console assembly (F). 11 12. Identify the Right and Left Trays (34, 36). 12 Attach the Trays (34, 36) to the Console Base (64) with eight #8 x 1/2" Screws (1); do not overtighten the Screws. F 50 34 36 1 14 64 1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
14
10.
Insert the Upright Wire (81) through one looped
tie (I) and insert the console wire (J) through the
other tie on the console assembly (F).
Connect the Upright Wire (81) to the con-
sole wire (J).
The connectors should slide
together easily and snap into place.
If they
do not, turn one connector and try again.
IF
YOU DO NOT CONNECT THE CONNECTORS
PROPERLY, THE CONSOLE MAY BECOME
DAMAGED WHEN YOU TURN ON THE
POWER.
Then, remove the wire tie from the
Upright Wire.
Pull the ties (I) tight around the Upright Wire
(81) and the console wire (J) and cut off the end
of the tie.
10
I
I
J
F
81
11.
Tighten two #8 x 1" Screws (50) into the
console assembly (F).
11
50
F
12
64
34
36
1
1
12.
Identify the Right and Left Trays (34, 36).
Attach the Trays (34, 36) to the Console Base
(64) with eight #8 x 1/2" Screws (1);
do not
overtighten the Screws.