NordicTrack E 5.5 Elliptical Canadian English Manual - Page 11

12. Identify the Right Pedal (14) and orient it as shown. 12 Attach the Right Pedal (14) to the right Pedal Arm (12) with three M8 x 50mm Screws (112). Attach the Left Pedal (not shown) to the left Pedal Arm (12) in the same way. 14 12 12 13. Apply a small amount of grease to a Long Pedal Arm Axle (106) and to an M8 x 23mm x 1.5mm 13 Washer (91). Next, partially tighten an M8 x 16mm Screw (102) and the M8 x 23mm x 1.5mm Washer (91) into one end of the Long Pedal Arm Axle (106). While a second person holds the end of the right Pedal Arm (12) inside the bracket on the Right Upper Body Leg (6), insert the Long Pedal Arm Axle (106) through both parts. Partially tighten another M8 x 16mm Screw (102) and an M8 x 23mm x 1.5mm Washer (91) into the Long Pedal Arm Axle (106). Then, tighten both Screws at the same time. Repeat this step on the other side of the elliptical. 112 102 91 12 6 106 Grease 91 102 14. Identify the Right Inner and Outer Leg Covers (27, 28) and orient them as shown. 14 Press the Right Inner and Outer Leg Covers (27, 28) together around the Right Upper Body Leg (6). Attach the Right Inner and Outer Leg Covers (27, 28) to the Right Upper Body Leg (6) with an M4 x 16mm Screw (93). To avoid damaging the plastic, do not overtighten the Screw. Attach the Left Inner and Outer Leg Covers (49, 50) in the same way. 50 49 93 27 6 28 11