NordicTrack E 5.5 Elliptical Canadian English Manual - Page 8

Attach the Left Upper Body Arm 9 to

Page 8 highlights

5. Tip: Avoid pinching the wires. Insert the Upright (5) into the Frame (1). Attach the Upright (5) with six M8 x 16mm Screws (102) and six M8 Split Washers (83). Do not tighten the Screws yet. Slide the Top Cover (23) downward. Do not press the Top Cover into the Right and Left Frame Covers (21, 22) yet. 5 Avoid pinching the wires 5 23 102 1 83 21, 22 102 83 102 6. Identify the Right Upper Body Arm (8) and the Right Upper Body Leg (6) and orient them as shown. Insert the Right Upper Body Arm (8) into the Right Upper Body Leg (6). Attach the Right Upper Body Arm (8) with three M8 x 45mm Bolts (104) and three M8 Locknuts (105). Make sure that the Locknuts are inside the hexagonal holes. Do not fully tighten the Bolts yet. Attach the Left Upper Body Arm (9) to the Left Upper Body Leg (7) in the same way. 6 9 Hexagonal Holes 8 105 104 6 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

8
6
5
Avoid pinching
the wires
5.
Tip: Avoid pinching the wires.
Insert the
Upright (5) into the Frame (1).
Attach the Upright (5) with six M8 x 16mm
Screws (102) and six M8 Split Washers (83).
Do
not tighten the Screws yet.
Slide the Top Cover (23) downward.
Do not
press the Top Cover into the Right and Left
Frame Covers (21, 22) yet
.
5
1
23
21, 22
102
83
102
83
102
6.
Identify the Right Upper Body Arm (8) and the
Right Upper Body Leg (6) and orient them as
shown.
Insert the Right Upper Body Arm (8) into the
Right Upper Body Leg (6).
Attach the Right Upper Body Arm (8) with three
M8 x 45mm Bolts (104) and three M8 Locknuts
(105).
Make sure that the Locknuts are inside
the hexagonal holes. Do not fully tighten the
Bolts yet.
Attach the Left Upper Body Arm (9) to the
Left Upper Body Leg (7) in the same way.
Hexagonal
Holes
9
6
8
104
105