NordicTrack E 5.5 Elliptical Canadian English Manual - Page 12

Attach the Left Rear and Front Leg Covers

Get NordicTrack E 5.5 Elliptical PDF manuals and user guides View all NordicTrack E 5.5 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

15. Remove and discard the cap (not shown) on the right Adjustment Pin (44). 15 Attach an Adjustment Knob (45) to the right Adjustment Pin (44) with an M6 x 12mm Screw (111). Then, press the tabs on a Knob Cap (46) into the Adjustment Knob (45). Repeat this step on the other side of the elliptical. 45 111 44 46 16. See step 6. Tighten the six M8 x 45mm Bolts (104). 16 See step 5. Tighten the six M8 x 16mm Screws (102). Tip: Tighten the two Screws on the front of the elliptical before tightening the other four Screws. Identify the Right Rear and Front Leg Covers (29, 30). Attach the Right Front Leg Cover (30) to the Right Upper Body Arm (8) with two M4 x 16mm Screws (93). Attach the Right Rear Leg Cover (29) around the Right Upper Body Arm (8) by pressing the tabs on the Right Rear Leg Cover into the Right Front Leg Cover (30). Attach the Left Rear and Front Leg Covers (31, 32) in the same way. Then, slide the Top Cover (23) downward and press it into the Right and Left Frame Covers (21, 22). 32 31 93 29 23 21, 22 30 8 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
12
15
15. Remove and discard the cap (not shown) on the
right Adjustment Pin (44).
Attach an Adjustment Knob (45) to the right
Adjustment Pin (44) with an M6 x 12mm
Screw (111).
Then, press the tabs on a Knob Cap (46) into the
Adjustment Knob (45).
Repeat this step on the other side of the
elliptical.
46
45
44
111
16.
See step 6.
Tighten the six M8 x 45mm Bolts
(104).
See step 5.
Tighten the six M8 x 16mm Screws
(102).
Tip: Tighten the two Screws on the
front of the elliptical before tightening the
other four Screws.
Identify the Right Rear and Front Leg Covers
(29, 30).
Attach the Right Front Leg Cover (30) to the
Right Upper Body Arm (8) with two M4 x 16mm
Screws (93).
Attach the Right Rear Leg Cover (29) around the
Right Upper Body Arm (8) by pressing the tabs
on the Right Rear Leg Cover into the Right Front
Leg Cover (30).
Attach the Left Rear and Front Leg Covers
(31, 32) in the same way.
Then, slide the Top Cover (23) downward and
press it into the Right and Left Frame Covers
(21, 22).
16
93
8
30
31
29
23
32
21, 22