NordicTrack E 5.5 Elliptical Canadian English Manual - Page 6

ASSEMBLY •• Assembly requires two persons. •• Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you nish all assembly steps. •• Left are marked “"L”" or “"Left”" and right parts are marked “"R”" or “"Right.”" •• To identify small parts, see page 5. •• In addition to the included tool(s), assembly requires the following tools: one Phillips screwdriver one rubber mallet Assembly may be easier if you have your own set of wrenches. To avoid damaging parts, do not use power tools. 1. Pull the Folding Frame (2) back until it locks into position. Then, see HOW TO FOLD AND 1 UNFOLD THE ELLIPTICAL on page 15 and unfold the elliptical. Tip: It may be easier to perform this step with the elliptical in the folded position. Orient the Rear Stabilizer (4) as shown. While a second person lifts the Folding Frame (2), attach the Rear Stabilizer (4) to the Folding Frame with two M10 x 120mm Screws (100) and two M10 Split Washers (88). 4 88 100 2. Orient the Front Stabilizer (3) as shown. 2 While a second person lifts the Frame (1), attach the Front Stabilizer (3) to the Frame with two M10 x 120mm Screws (100) and two M10 Split Washers (88). 2 3 88 100 1 6