NordicTrack Se 3i Instruction Manual - Page 7

Tip: Make sure to lift the Pedal Arms 16, 17, above the Stabilizer 3 before you attach it.

Get NordicTrack Se 3i PDF manuals and user guides View all NordicTrack Se 3i manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

2. If there is a shipping tube (not shown) attached to the Frame (1), remove the screws (not shown) 2 and then remove the shipping tube. Discard the screws and the shipping tube. With the help of a second person, place some of the packing materials (not shown) under the rear of the Frame (1). Attach a Stabilizer (3) to the Frame (1) with two M10 x 82mm Screws (70). Then, remove the packing materials from under the rear of the Frame (1). 3 70 3. If there is a shipping tube (not shown) attached to the Frame (1), remove the screws (not shown) 3 and then remove the shipping tube. Discard the screws and the shipping tube. With the help of a second person, place some of the packing materials (not shown) under the front of the Frame (1). Tip: Make sure to lift the Pedal Arms (16, 17) above the Stabilizer (3) before you attach it. 16 Attach the other Stabilizer to the Frame (1) with two M10 x 82mm Screws (70). Then, remove the packing materials from under the front of the Frame (1). 1 17 3 70 1 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
7
3.
If there is a shipping tube (not shown) attached
to the Frame (1), remove the screws (not shown)
and then remove the shipping tube. Discard the
screws and the shipping tube.
With the help of a second person, place some
of the packing materials (not shown) under the
front of the Frame (1).
Tip: Make sure to lift the Pedal Arms (16, 17)
above the Stabilizer (3) before you attach it.
Attach the other Stabilizer to the Frame (1) with
two M10 x 82mm Screws (70).
Then, remove the packing materials from under
the front of the Frame (1).
3
1
70
3
17
3
70
1
2
2.
If there is a shipping tube (not shown) attached
to the Frame (1), remove the screws (not shown)
and then remove the shipping tube. Discard the
screws and the shipping tube.
With the help of a second person, place some of
the packing materials (not shown) under the rear
of the Frame (1).
Attach a Stabilizer (3) to the Frame (1) with two
M10 x 82mm Screws (70).
Then, remove the packing materials from under
the rear of the Frame (1).
16