NordicTrack Se 3i Instruction Manual - Page 8
insert both, Bolts, and then tighten the Locknuts., Then, tighten the indicated M10 Locknut A.,
View all NordicTrack Se 3i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
4. With the help of a second person, raise the Upright (2) to the vertical position. 4 Secure the Upright (2) to the Frame (1) with an M10 x 75mm Bolt (61), an M10 x 80mm Bolt (86), and two M10 Locknuts (62); insert both Bolts, and then tighten the Locknuts. Then, tighten the indicated M10 Locknut (A). 2 62 A 62 61 86 1 5. Identify the Rear Shield Cover (27) and the Front Shield Cover (28), and orient them as shown. 5 Press the Rear and Front Shield Covers (27, 28) together around the Upright (2), slide them downward, and press them onto the Left and Right Shields (30, 31). 2 27 28 30 31 6. Attach the Rear Upright Cover (25) to the Upright (2) with three M4 x 16mm Screws (78); start all 6 the Screws, and then tighten them. Then, insert the Accessory Tray (24) into the 24 Rear Upright Cover (25). 25 78 8 78 2