NordicTrack T16.0 Instruction Manual - Page 11

Orient the Pulse Crossbar 93 as shown. Attach, Identify the Left and Right Trays 36

Get NordicTrack T16.0 PDF manuals and user guides View all NordicTrack T16.0 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

9. Identify the Left and Right Trays (36, 27). Attach the Trays (36, 27) to the Console Base (64) with eight #8 x 1/2" Screws (1). Note: It may be easier to start the two inside Screws and then slide the Trays into place before you tighten the other six Screws. Note: It may be necessary to rotate the Console Frame (104) upward to attach the Trays (36, 27). 9 1 27 1 104 1 36 1 64 1 10. IMPORTANT: To avoid damaging the Pulse Crossbar (93), do not use power tools and do 10 not overtighten the #10 x 3/4" Screws (9). Orient the Pulse Crossbar (93) as shown. Attach the Pulse Crossbar to the Handrails (86) with four #10 x 3/4" Screws (9) and four #10 Star Washers (5). First, start all four Screws. Next, 93 slide the Crossbar as far as possible in the direction shown by the arrow. Then, tighten 9 the Screws. 81 5  Make sure that the Upright Wire (81) is not pinched. Firmly tighten the four 5/16" x 2 1/2" 86 Screws (28). 28 9 86 5 28 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
11
64
27
36
104
1
1
9
9.
Identify the Left and Right Trays (36, 27).
Attach the Trays (36, 27) to the Console
Base (64) with eight #8 x 1/2" Screws (1).
Note: It may be easier to start the two inside
Screws and then slide the Trays into place
before you tighten the other six Screws.
Note: It may be necessary to rotate the
Console Frame (104) upward to attach the
Trays (36, 27).
1
1
10.
IMPORTANT: To avoid damaging the Pulse
Crossbar (93), do not use power tools and do
not overtighten the #10 x 3/4" Screws (9).
Orient the Pulse Crossbar (93) as shown. Attach
the Pulse Crossbar to the Handrails (86) with
four #10 x 3/4" Screws (9) and four #10 Star
Washers (5).
First, start all four Screws. Next,
slide the Crossbar as far as possible in the
direction shown by the arrow. Then, tighten
the Screws.
Make sure that the Upright Wire (81) is not
pinched.
Firmly tighten the four 5/16" x 2 1/2"
Screws (28).
10
9
9
5
5
28
28
86
93
86
81
1