NordicTrack T16.0 Instruction Manual - Page 13

angle as you set them against the Uprights., Make sure not to overtighten the Screws.

Page 13 highlights

13. A ttach the Pulse Crossbar (93) to the console assembly (G) with six #8 x 1/2" Screws (1); start 13 G all six Screws, and then tighten them.  Firmly tighten the four 5/16" x 3/4" Screws (4). 4 93 1 1 4 1 14. Check the gaps between the handrail assemblies (D, J) and the console assembly (G). 14 If necessary, loosen the #8 x 3/4" Screws (2) under the handrails and slide the handrails forward against the console assembly (G). Then, retighten the Screws. Attach the Left Outside Upright Cover (87) and the Right Outside Upright Cover (96) to the Left and Right Uprights (89, 90) with two #8 x 1/2" Screws (1). Note: Rotate the Covers at an angle as you set them against the Uprights. 87 Make sure not to overtighten the Screws. G 96 1 1 2 J D 90 2 89 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

13
13.
Attach the Pulse Crossbar (93) to the console
assembly (G) with six #8 x 1/2" Screws (1);
start
all six Screws, and then tighten them.
Firmly tighten the four 5/16" x 3/4" Screws (4).
13
93
4
4
1
1
1
G
14.
Check the gaps between the handrail assem-
blies (D, J) and the console assembly (G).
If necessary, loosen the #8 x 3/4" Screws (2)
under the handrails and slide the handrails
forward against the console assembly (G). Then,
retighten the Screws.
Attach the Left Outside Upright Cover (87) and
the Right Outside Upright Cover (96) to the Left
and Right Uprights (89, 90) with two #8 x 1/2"
Screws (1).
Note: Rotate the Covers at an
angle as you set them against the Uprights.
Make sure not to overtighten the Screws.
14
96
90
1
1
87
G
2
J
D
89
2