NordicTrack T16.0 Instruction Manual - Page 12

May Become Damaged When You Turn, If You Do Not Connect

Get NordicTrack T16.0 PDF manuals and user guides View all NordicTrack T16.0 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

11. W ith the help of a second person, hold the console assembly (G) near the left Handrail (86) and 11 the right Handrail (not shown). Connect the ground wire (H) from the console assembly to the Console Ground Wire (105) on the Pulse Crossbar (93).  See the inset drawing. Connect the Upright Wire (81) to the console wire (I). The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie (C) from the Upright Wire. G H 105 81 93 I C 81 I 86 12. S et the console assembly (G) on the brackets on the Handrails (86). Make sure that no wires 12 are pinched. Insert the excess Upright Wire (81) into the Left Upright (89). Attach the console assembly (G) to the brackets on the Handrails (86) with the four 5/16" x 3/4" Screws (4) you removed in step 8 and four 5/16" Star Washers (11); do not tighten the Screws yet. 86 11 4 G 89 81 11 4 104 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
12
11. With the help of a second person, hold the con-
sole assembly (G) near the left Handrail (86) and
the right Handrail (not shown).
Connect the ground wire (H) from the console
assembly to the Console Ground Wire (105) on
the Pulse Crossbar (93).
See the inset drawing.
Connect the Upright
Wire (81) to the console wire (I).
The connec-
tors should slide together easily and snap
into place.
If they do not, turn one connector
and try again.
IF YOU DO NOT CONNECT THE
CONNECTORS PROPERLY, THE CONSOLE
MAY BECOME DAMAGED WHEN YOU TURN
ON THE POWER.
Then, remove the wire tie (C)
from the Upright Wire.
11
81
81
I
86
G
H
C
I
105
93
12.
Set the console assembly (G) on the brackets
on the Handrails (86).
Make sure that no wires
are pinched.
Insert the excess Upright Wire (81)
into the Left Upright (89).
Attach the console assembly (G) to the brackets
on the Handrails (86) with the four 5/16" x 3/4"
Screws (4) you removed in step 8 and four 5/16"
Star Washers (11);
do not tighten the Screws
yet.
12
86
4
4
89
81
104
11
11
G