NordicTrack T9ci Treadmill User Manual - Page 11

11. Hold a Handrail Spacer (77) near the top of the Right Upright (112) as shown. Insert the Wire Harness (79) through the large hole in the center of the Handrail Spacer. Have a second person hold the console assembly near the Right Upright (112). Connect the Wire Harness (79) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Remove the wire tie from the Wire Harness. 11 Console Assembly Console Wire 79 77 112 Wire Tie Console Wire 79 12. Have a second person set the console assembly on the Handrail Spacer (77) and the Right Upright (112) as you insert the wires into the Right Upright. Partially tighten two 5/16" x 4" Bolts (12) with two 5/16" Star Washers (4) into the Right Upright (112) and the Right Handrail (107); do not tighten the Bolts yet. Repeat this step on the left side of the treadmill. Then, fully tighten the four 5/16" x 4" Bolts (12). 12 Wires 77 112 107 4 12 Console Assembly 11