NordicTrack T9ci Treadmill User Manual - Page 8

Slide the Right Base Cover 119 over the Base

Get NordicTrack T9ci Treadmill PDF manuals and user guides View all NordicTrack T9ci Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

3. Identify the Right Upright (112), which is marked with a sticker. Have a second person hold the Right Upright near the Base (85) as shown. Slide the Right Base Cover (119) onto the end of the Right Upright. See the inset drawing. Tie the wire tie in the Right Upright (112) securely around the end of the Wire Harness (79). Then, pull the other end of the wire tie until the Wire Harness is routed completely through the Right Upright. 3 79 Wire Tie 112 119 4. Hold the Right Upright (112) against the Base (85), with the bend in the Right Upright posi- 4 tioned as shown. Be careful not to pinch the Wire Harness (79). Attach the Right Upright (112) to the Base (85) with two 3/8" x 2 3/8" Bolts (10) and two 3/8" Star Washers (18); do not fully tighten the Bolts yet. Bend 112 112 79 Wire Tie 79 85 79 85 18 10 5. Slide the Right Base Cover (119) over the Base (85). Attach the Right Base Cover with three #8 5 x 3/4" Screws (1). Do not overtighten the Screws. 8 119 85 1 1 1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
3.
Identify the Right Upright (112), which is marked
with a sticker. Have a second person hold the
Right Upright near the Base (85) as shown.
Slide the Right Base Cover (119) onto the end
of the Right Upright.
See the inset drawing.
Tie the wire tie in the
Right Upright (112) securely around the end of
the Wire Harness (79). Then, pull the other end
of the wire tie until the Wire Harness is routed
completely through the Right Upright.
3
119
Wire
Tie
85
79
4.
Hold the Right Upright (112) against the Base
(85), with the bend in the Right Upright posi-
tioned as shown.
Be careful not to pinch the
Wire Harness (79).
Attach the Right Upright (112) to the Base (85)
with two 3/8" x 2 3/8" Bolts (10) and two 3/8"
Star Washers (18);
do not fully tighten the
Bolts yet.
4
10
85
Bend
18
112
79
5.
Slide the Right Base Cover (119) over the Base
(85). Attach the Right Base Cover with three #8
x 3/4" Screws (1).
Do not overtighten the
Screws.
5
1
1
1
85
119
79
112
Wire Tie
8
79
112