NordicTrack T9ci Treadmill User Manual - Page 26

THE INFORMATION MODE HOW TO ADJUST THE CUSHIONING SYSTEM The console features an information mode that allows you to select a unit of measurement for the console and turn on or turn off the display demo mode. You can also adjust the contrast of the screen and set the date and time. To select the information mode, hold down the Stop button, insert the key into the console, and then release the Stop button. When the information mode is selected, the following information will appear on the screen: The screen will show the selected unit of measurement. To change the unit of measurement, press the Speed increase button. To view distance in miles, select ENGLISH. To view distance in kilometers, select METRIC. Remove the key from the console and unplug the power cord. The treadmill features a cushioning system that reduces the impact as you walk or run on the treadmill. To increase the firmness of the walking platform, step off the treadmill and slide the platform cushions toward the front of the treadmill. To decrease the firmness, step off the treadmill and slide the platform cushions toward the back of the treadmill. Note: Make sure that both cushions are set at the same firmness level. The faster you run on the treadmill, or the more you weigh, the firmer the walking platform should be. Platform Cushion Increase The console features a display demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, switch the reset/off circuit breaker to the reset position, and insert the key into the console. However, when you remove the key, the displays will remain lit, although the buttons will not function. If the demo mode is turned on, the word "ON" will appear on the screen while the information mode is selected. To turn on or turn off the demo mode, press the Speed decrease button. Decrease Platform Cushion Walking Platform To change the contrast of the screen, press the Incline increase and decrease buttons. You can also view the date and time. To set the date and time, see step 5 on page 16. To exit the information mode, remove the key from the console. 26