Oki C6100n OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 123
Troubleshooting, Self-diagnostic test, TCP/IP
View all Oki C6100n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Troubleshooting The network addresses used in this manual are shown for example only. Network addresses used in your installation must be generated from your own network. Self-diagnostic test Printer does not print. Ensure the printer emulation is set to PS (if available) or Automatic. NG is printed in the Self-diagnostic test. Confirm that the NIC is installed correctly in models that require an optional NIC card and turn the printer off and on again. Ensure the network cable is correctly connected and connect to a different network segment, rerun the test and see if this cures the fault. EEPROM Check registers NG. Confirm that the NIC is installed correctly and turn the printer off and on again. Initialize the NIC. TCP/IP Printer cannot find the network interface card. Turn the printer off and on again. Confirm the network interface is enabled on the printer. Check there is a response to the interface card command. Check the network cable is correctly connected. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Troubleshooting - 123