Oki C6100n OkiLAN 8300e Network User's Guide for C6000n and C6100 Series Print - Page 127
EtherTalk, Not identified by the Chooser and the Setup Utility.
View all Oki C6100n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
EtherTalk Not identified by the Chooser and the Setup Utility. Turn the printer off and on again. Check the network cable is correctly connected. Change the cable and try again. If the network resides in a Zone, check the correct Zone name is selected in the Chooser. Check the Zone name in the utility related to the NIC is the same as the Zone name set in NIC. Check AppleTalk, which is displayed at the right bottom of the Chooser, is set to Enable. (In some OS versions Network is used instead of AppleTalk.) Check Ethernet is selected in AppleTalk. (In some OS versions Network is used instead of AppleTalk.) Check the print driver is selected in the Chooser. Check the EtherTalk protocol is set to Enable. Print the NIC settings and confirm that the EtherTalk Port name is not blank. OkiLAN 8300e Network User's Guide, C6000n and C6100 Series Troubleshooting - 127