Oki ML490 ML490/491 User's Guide (American English) - Page 18
Paper Park
View all Oki ML490 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Changing the Forms Tear-Off Setting Note: The default setting for Forms Tear-Off is OFF. To change the Forms Tear-Off setting: 1 Press SHIFT (2) + SEL (1). 2 Press GROUP (3) repeatedly until the Rear Feed or Bottom Feed group shows in the first column of the printed line, depending on which paper feed you are using, 3 Press ITEM (4) repeatedly until Form Tear-Off appears in the second column: Rear Feed Form Tear-Off Off 4 Press SET (5) until the time interval you wish to select appears in the third column: Rear Feed Form Tear-Off 1 Sec 5 Press SHIFT (2) + SEL (1) to exit Menu Mode and save the setting. 18 Microline 490/491 User's Guide Manual Forms Tear Off If you don't wish to engage the Forms Tear-Off feature, you can advance • rear-feed continuous forms loaded on the built-in tractor or • bottom-feed continuous forms loaded on the optional push tractor up to the tear off position manually by pressing TEAR (5). Paper Park Important! Never park labels! Paper park allows you to switch to single-sheet printing without removing continuous feed paper from the printer. When you wish to print single sheets, simply press PARK (6) to retract the continuous form paper from the paper path, then lift the sheet guide, load the sheet and send the print job.