Oki ML490 ML490/491 User's Guide (American English) - Page 33
bold italic, Buffer Print, Invalid, Enable, Ready/Busy, Valid, Ready on Power Up
View all Oki ML490 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Menu Settings Table (Continued) Group Parallel I/F Serial IF† Item I-Prime Pin 18 Auto Feed XT* Bi-Direction Parity Serial Data 7/8 Bits Protocol Diagnostic Test Busy Line Baud Rate DSR Signal DTR Signal Busy Time Settings (Defaults are set in bold italic) Buffer Print, Buffer Clear, Invalid +5V, Open Invalid, Valid Enable, Disable None, Odd, Even 8 Bits, 7 Bits Ready/Busy, X/On / X/Off No, Yes SSD-, SSD+, DTR, RTS 19200 bps, 9600 bps, 4800 bps, 2400 bps, 1200 bps, 600 bps, 300 bps Valid, Invalid Ready on Power Up, Ready on Select 200 ms, 1 sec. * Appears only when the Epson LQ emulation is selected. † Appears only when the optional Serial Interface is installed. Menu Mode 33
Menu Mode
33
Menu Settings Table (Continued)
Group
Item
Settings (Defaults are set in
bold italic)
Parallel I/F
I-Prime
Buffer Print
, Buffer Clear, Invalid
Pin 18
+5V
, Open
Auto Feed XT*
Invalid
, Valid
Bi-Direction
Enable
, Disable
Serial IF†
Parity
None
, Odd, Even
Serial Data 7/8 Bits
8 Bits
, 7 Bits
Protocol
Ready/Busy
, X/On / X/Off
Diagnostic Test
No
, Yes
Busy Line
SSD-
, SSD+, DTR, RTS
Baud Rate
19200 bps,
9600 bps
, 4800 bps, 2400 bps, 1200 bps, 600 bps, 300 bps
DSR Signal
Valid
, Invalid
DTR Signal
Ready on Power Up
, Ready on Select
Busy Time
200 ms
, 1 sec.
* Appears only when the Epson LQ emulation is selected.
† Appears only when the optional Serial Interface is installed.