Olympus C3020 C-3020 Zoom Reference Manual (5.6 MB) - Page 189

Troubleshooting (Cont.) Chapter 12 POSSIBLE CAUSES CORRECTIVE ACTION REF. PAGE No picture is taken when the shutter button is pressed. 7 The batteries ran out of power. 8 The control panel/ monitor indications disappear, or only the battery check blinks. 9 A write-protect adhesive seal is placed on the card or there is no card in the camera. 7 Replace the batteries with new ones. 8 Replace the batteries with new ones. (Do not open the battery compartment cover when the card access lamp is blinking.) 9 Insert a new card in the camera. P. 25 P. 25 P. 29 The date recorded with the image data is wrong. 1 The date is not set. 2 The camera has been left for approx. 1 hour with the batteries removed and the date setting is canceled. 1 Set the date. (The clock adjustment is not factorypreset.) 2 Set the date again. P. 32 P. 32 The flash does not fire. 1 The flash is set to the off mode. 2 The subject is in bright light. 3 Sequential shooting and Auto bracketing BKT are on. 4 You are recording movies. 1 Press the button to select a flash mode other than . 2 Set the flash to Fill-In mode. 3 Set DRIVE to menus. in the 4 Set the shooting mode to any mode other than the Movie mode. P. 88-91 P. 88 P. 98 P. 64 ~ Continued on next page 189