Olympus E-500 EVOLT E-500 Advanced Manual (English) - Page 128

V button function This lets you replace the function assigned to the V (one-touch WB) button by registering another function. 1 Menu [ ] [V FUNCTION] 2 Use ac to set. [V] One-touch white balance button (factory-default setting) [TEST PICTURE] This enables you to check the picture you have just taken on the monitor (REC VIEW feature) without having to record the picture to the card. This is useful when you want to see how a picture turned out before saving it. [MY MODE] While holding down the V button, you can take pictures using the camera settings registered in the [MY MODE SETUP] (g See below). [PREVIEW] While holding down the V button, you can use the preview function. (g P. 47) 3 Press the i button. 8 My Mode setting You can register 2 different combinations of camera settings and temporarily call up one of the registered settings while taking pictures. You can use My Mode by setting the V button to [MY MODE]. Take pictures while pressing the V button. Set the menu in advance to differentiate between which of the two MY MODE SETUP settings to use. 1 Menu [ ] [MY MODE SETUP] 2 Use to set. [MY MODE1] / [MY MODE2] • If menu settings have already been registered, [SET] is displayed next to the corresponding reset option. 3 Use to select [SET]. • The current setting is displayed on the monitor. Clearing already registered settings Use to select [RESET]. • Registered settings are canceled. 4 Press the i button. 5 Select either of the [MY MODE SETUP] settings on the menu and press the i button. • Select [YES] and press the i button to set the My Mode you can use. 128 Customizing the settings/functions of your camera