Olympus E-500 EVOLT E-500 Advanced Manual (English) - Page 44
The picture looks blurred. - tripod
UPC - 050332299405
View all Olympus E-500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Advanced shooting modes Selecting the right mode for shooting conditions 3 Press the shutter button halfway. • Focusing is performed and the AF confirmation mark lights on the viewfinder. • The aperture value that has been set automatically by the camera is displayed on the viewfinder. Halfway down Shutter speed Aperture value Shutter speed Aperture value 3 Viewfinder Viewfinder AF confirmation mark Exposure mode If the aperture value indication at the minimum value is blinking*, the correct exposure has not been attained (underexposed). Set the shutter speed slower. AF confirmation mark Exposure mode If the aperture value indication at the maximum value is blinking*, the correct exposure has not been attained (overexposed). Set the shutter speed higher. * The aperture value at the moment when its indication blinks varies depending on the lens type and focal length of the lens. 4 Press the shutter button all the way. All the way down TIPS The picture looks blurred. J The possibility of camera shake spoiling your picture increases greatly during macro or ultra-telephoto shooting. Set the shutter speed higher or use a monopod or tripod to stabilize the camera. The aperture value indication does not stop blinking after the shutter speed is changed. J If the aperture value indication at the maximum value is blinking, set the ISO sensitivity to a lower value or use a commercially-available ND filter (for adjusting the amount of light). g "ISO - Setting the desired sensitivity to light" (P. 82) J If the aperture value indication at the minimum value is blinking, set the ISO sensitivity to a higher value. g "ISO - Setting the desired sensitivity to light" (P. 82) To change the EV step interval: J In the menu, set the EV step interval to 1/3EV, 1/2EV or 1EV. g "EV step" (P. 123) 44