Olympus E10 E-10 Battery Charger B-20LPC Instructions (日本 - Page 12
Charging the battery
View all Olympus E10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Charging the battery 1 Connect the AC cable plug to the AC input connector on the charger. 2 Plug the AC power cord into an AC power outlet. To home AC outlet 3 Place the battery on the battery charger and slide it in until you hear a click. ● The charging indicator may blink for an instant (less than one second) when the battery is inserted or just before charging is complete. However, this is normal and merely shows that the charger is communicating with the battery. Terminal ● Check the battery's status by the color of the charging indicator. Charging indicator color Orange Green Red Charging indicator condition Lit. Lit. Blinking. Blinking. Battery status Charging is continuing normally. Charging is complete. An error has occurred.* Too much charging time has passed. The battery has weakened or is defective.* * Remove the battery immediately. If the battery can not be fully charged under normal operating conditions, then it is most likely defective. Replace the battery with a new one. Notes In the following cases, it should be assumed that this product is out of order. Unplug the AC power cord immediately and consult your local Olympus representative. ● Charging has not finished after six hours. ● The red or green charging indicator blinks after several charges. 12