Olympus SP 570 SP-570UZ Instruction Manual (English) - Page 42
Fulltime Af, Af Predict, Af Illuminat., Image Stabilizer
UPC - 050332162976
View all Olympus SP 570 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
When [AREA] is selected P 1/400 F3.5 • To move the AF target mark The AF target mark changes to V. Use the arrow pad to move the position of the AF target mark. You can take pictures while in this status. • To set the position of the AF target mark Hold down o. To change the position of the mark, hold down o again. FULLTIME AF Shooting pictures while keeping the subject in focus OFF ON Press the shutter button halfway to focus. Fulltime AF keeps the subject in front of the lens in focus at all times, without having to press the shutter button halfway. The focusing time is reduced, so you will not miss snapshot opportunities. Also, the subject is automatically kept in focus during movie recording. AF PREDICT Shooting pictures with the focus on subjects moving back and forth OFF AF predict is deactivated. ON When activated, position the AF target mark on the subject and press the shutter button halfway to engage the AF predict. Then, press the shutter button completely to take the picture. • AF predict continues to operate while the shutter button is pressed halfway ({ blinks). • Depending on the subject, the picture may be out of focus even if [AF PREDICT] is set. • During macro and super macro mode, [AF PREDICT] is not available. AF ILLUMINAT Setting to light the illuminator in a dark place OFF ON AF illuminator does not light. Press the shutter button halfway. The AF illuminator lights automatically, allowing you to focus in a dark place. Menu operations IMAGE STABILIZER Shooting pictures using dual image stabilization This function stabilizes the blur caused by camera movement when taking pictures. OFF ON Dual image stabilization is deactivated. Dual image stabilization is activated after pressing the shutter button halfway. • When taking pictures with the camera stabilized (using a tripod), set to [OFF]. • Images may not be correctable if the camera is severely shaken. • During night shooting or when the shutter speed is very slow, the Digital image stabilization mode may not work. w Adjusting the amount of light emitted by the flash Depending on situations such as shooting small subjects or distant backgrounds, it may be advisable to adjust the amount of light emitted by the flash. In addition, this function is useful when increased contrast is desired. -2.0EV to 0.0 to +2.0EV Press 12 to adjust, and press o. 42 EN