Olympus SP 570 SP-570UZ Instruction Manual (English) - Page 76
When you get an error message on the camera
UPC - 050332162976
View all Olympus SP 570 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Getting to know your camera better When you get an error message on the camera Monitor indication q CARD ERROR q WRITE PROTECT > MEMORY FULL q CARD FULL L NO PICTURE Possible cause There is a problem with the card. Corrective action This card cannot be used. Insert a new card. Writing to the card is prohibited. The recorded image has been protected (read-only) on a computer. Download the image to a computer and cancel the readonly setting. The internal memory has no available memory and cannot store any new data. Insert a card or erase unwanted data. Before erasing, backup the data of important pictures onto the card, or download such pictures to a computer. The card has no available memory and cannot store any new data. Replace the card or erase unwanted data. Before erasing, download important pictures to a computer. There are no pictures in the The internal memory or the card contains internal memory or on the no pictures. card. Record pictures. r PICTURE ERROR r THE IMAGE CANNOT BE EDITED There is a problem with the selected picture and it cannot be played back on this camera. If pictures taken by other cameras are selected, they cannot be edited. Use image processing software to view the picture on a computer. If that cannot be done, the image file is damaged. Use image processing software to edit the pictures. The card cover is open. Close the card cover. CARD-COVER OPEN g The battery is empty. BATTERY EMPTY Insert new batteries. When using rechargeable batteries, charge the batteries. Recording has stopped to allow camera to cool. Please wait a moment. Camera is cooling. Please wait a moment. When [IMAGE STABILIZER] is set to [ON], the camera's internal temperature rises due to continuous movie recording for a long period, thereby causing shooting to stop. Allow the camera to cool down for some time before you begin shooting again. Or you can shoot with [IMAGE STABILIZER] set to [OFF]. CARD SETUP CLEAN CARD FORMAT SET OK Data in the card cannot be read. Or, the card is not formatted. • Select [CLEAN CARD], and press o. Remove the card and wipe the contact area with a soft dry cloth. • Select [FORMAT][YES] and press o. All data on the card is erased. 76 EN