Olympus SP 570 SP-570UZ Instruction Manual (English) - Page 85

Useful use of the accessories

Page 85 highlights

Note • Although there is no limit to the number of wireless flashes you can use, it is recommended that no more than three flashes be used to prevent flash malfunction due to mutual interference. • In RC mode, the built-in flash is used to control the wireless flash. The built-in flash cannot be used for flash shooting in this mode. • For 2nd curtain synchronization, set the shutter speed to within 4 seconds. Wireless flash shooting may not operate properly when using a slower shutter speed. Useful use of the accessories The card Pictures can be recorded on the optional card. The internal memory and card are the camera's media for recording pictures, similar to film in a film camera. Pictures recorded to the internal memory or card can be easily erased on the camera or processed using a computer. Unlike portable storage media, the internal memory cannot be removed or exchanged. The number of recordable pictures can be increased by using a card with a larger capacity. 1 Index area You can use this space to note down the contents of the card. 2 Contact area The part where the data transferred from the camera enters the card. Do not touch this part with your hands. Compatible cards xD-Picture Card (16 MB - 2 GB) (TypeH/M, Standard) Using the internal memory or card You can confirm on the monitor whether the internal memory or card is being used during shooting and playback operations. Shooting mode Playback mode P Memory indicator B: When using the internal memory No icon: When using a card 10M NORM 10M 100-0004 NORM IN 4 2008.08.26 12:30 IN 4 Note • Do not open the battery compartment cover and card cover while the card access lamp is blinking as data reading and writing is in progress. Doing so may damage the data in the internal memory or the card and render the internal memory or card unusable. Appendix EN 85

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100

EN
85
Appendix
Note
Although there is no limit to the number of wireless flashes you can use, it is recommended
that no more than three flashes be used to prevent flash malfunction due to mutual
interference.
In RC mode, the built-in flash is used to control the wireless flash. The built-in flash cannot
be used for flash shooting in this mode.
For 2nd curtain synchronization, set the shutter speed to within 4 seconds. Wireless flash
shooting may not operate properly when using a slower shutter speed.
Pictures can be recorded on the optional card.
The internal memory and card are the camera’s media for recording pictures, similar to film in a film
camera.
Pictures recorded to the internal memory or card can be easily erased on the camera or processed
using a computer.
Unlike portable storage media, the internal memory cannot be removed or exchanged.
The number of recordable pictures can be increased by using a card with a larger capacity.
1
Index area
You can use this space to note down the contents of the card.
2
Contact area
The part where the data transferred from the camera enters the
card. Do not touch this part with your hands.
Compatible cards
xD-Picture Card (16 MB - 2 GB) (TypeH/M, Standard)
Using the internal memory or card
You can confirm on the monitor whether the internal memory or card is being used during shooting
and playback operations.
Note
Do not open the battery compartment cover and card cover while the card access lamp is
blinking as data reading and writing is in progress. Doing so may damage the data in the
internal memory or the card and render the internal memory or card unusable.
Useful use of the accessories
The card
Shooting mode
Playback mode
10
M
10
M
2008.08.26
2008.08.26
12:30
12:30
100-0004
100-0004
IN
N
ORM
N
ORM
10
M
10
M
P
4
IN
N
ORM
N
ORM
Memory indicator
B
:
When using the internal memory
No icon:When using a card