Olympus SP 570 SP-570UZ Instruction Manual (English) - Page 84
Olympus SP 570 - UZ Digital Camera Manual
UPC - 050332162976
View all Olympus SP 570 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Shooting with the Olympus wireless RC flash system Wireless flash shooting is possible with the Olympus wireless RC flash system. With this wireless flash system, you can take pictures using multiple wireless flashes. The built-in flash is used to communicate between the camera and the external flashes. For details on using the wireless flash, see the manual of the external flash. Wireless flash setup range Position the wireless flash so that the wireless sensor faces the camera. The setup range guidelines are as shown below. The range changes according to the surrounding environment. Remote sensor Direction of the emitted flash Direction of the camera 50° 30° 60° 100° 50° 5m 30° 10m Appendix 1 Position the flash while referring to the "Wireless flash setup range", and turn on the flash. 2 Press the MODE button on the flash to set it to RC mode, and set the channel and group of the flash. Set the group to A (the flash will not operate if B or C is selected). 3 Select [#RC] from [QFLASH] on the camera, and then set [CH1] - [CH4] to the same channel as the flash. g "QFLASH Setting to use an external flash" (P.43) 4 Press #UP to raise the built-in flash. 5 Select a flash mode. • Red-eye reduction flash is not possible in RC mode. 6 After shooting preparations are completed, take some test shots to check the flash operation and images. 7 Begin shooting while checking the charging completed indications of the camera and flash. 84 EN