Olympus WS-400S WS-500M Detailed Instructions (English) - Page 39
Select the recording rate., Press the, button to start, recording., button, adjust the start/stop
UPC - 050332169098
View all Olympus WS-400S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Menu setting method [MP3]: MPEG is the international standard established by a working group of the ISO (International Organization for Standardization). [WMA]: This is an audio compression encoding method that was developed by the Microsoft Corporation in the US. 2 Select the recording rate. [PCM]*: [44.1 kHz/16 bit] [MP3]*: [256 kbps], [128 kbps] [WMA]: [ST XQ], [ST HQ], [ST SP], [HQ], [SP], [LP] * For WS-520M only. • To record a meeting and lecture clearly, set other than [LP] in [Rec Mode]. • When the external monaural microphone is used while [Rec Mode] is set to a stereo recording mode, it enables recording only with the L channel microphone. Low Cut Filter The recorder has a Low Cut Filter function to minimize low-frequency sounds and record voices more clearly. This function can reduce noise from air conditioners, projectors and other similar noises. [On]: Enables the Low Cut Filter function. [Off]: Disables this function. VCVA When the microphone senses that sounds have reached a preset threshold volume level, the built-in Variable Control Voice Actuator (VCVA) starts recording automatically, and stops when the volume drops below the threshold level. The VCVA feature extends recording time and conserves memory by stopping recording during silent periods, which helps the playback to be more efficient. [On]: Enables the VCVA function. Will start recording in VCVA mode. [Off]: Disables this function. Will resume recording in normal mode. Adjust the start/stop actuation level: 1 Press the REC (s) button to start recording. • When the sound volume is lower than the preset threshold sound level, recording automatically stops after 1 sec approximately, and [Standby] 4 flashes on the display. The recording indicator light glows when recording starts and flashes when recording pauses. 2 Press the 9 or 0 button adjust the start/stop actuation level. • The VCVA level can be set to any of 15 different values. • The higher the value, the more sensitive the recorder to sounds. At the highest value, even the faintest sound will activate recording. a b a Level meter (varies according to the sound volume being recorded) b Start level (moves to the right/left according to the set level) EN 39 Menu setting method