Olympus WS-400S WS-500M Detailed Instructions (English) - Page 66
Troubleshooting
UPC - 050332169098
View all Olympus WS-400S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Troubleshooting Symptom Nothing appears on the display Probable cause Action The batteries are not loaded properly. Verify that the batteries' polarities = and - are correct (☞ P.10). Battery power is getting low. Replace with new batteries (☞ P.10). The power is off. Turn the power on (☞ P.13). Battery power is getting low. Replace with new batteries (☞ P.10). Won't start Unable to record No playback tone 6 heard Recording level too low Voice files are not recorded in stereo Cannot find the recorded Voice File Noise heard during playback EN 66 The power is off. Turn the power on (☞ P.13). The recorder is in HOLD mode. Release the recorder from HOLD (☞ P.14). Low remaining memory. Erase unnecessary files (☞ P.34). The maximum number of files has been reached. The earphone is connected. Change to the another folder (☞ P.18 to P.21). Unplug the earphones to use the internal speaker. The volume level is set to [00]. Adjust the volume level (☞ P.27). Set the microphone sensitivity to the The microphone sensitivity is too low. conference mode and try again (☞ P.23 or P.36, P.38). This could potentially be because the output level for the connected external devices are too low. Adjust the output level for the connected devices. The connected external microphone is monaural. When recording while an external monaural microphone is connected, sound will only be recorded by the L-channel. [Rec Mode] is set to a monaural recording mode. Set [Rec Mode] to the stereo recording mode (☞ P.36, P.38). Wrong folder. Switch to the correct folder (☞ P.18 to P.21). The recorder was shaken during recording. -------- The recorder was placed near a cell phone or fluorescent lamp while recording or during playback. Move the recorder. Troubleshooting