Onkyo HTSP908 Owner Manual - Page 20
Switching the video output to interlace, using the front panel controls, Compatibility of
UPC - 751398007866
View all Onkyo HTSP908 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
DV-SP405_En.book Page 20 Tuesday, May 29, 2007 2:48 PM Connecting the DV-SP405-Continued Switching the video output to interlace using the front panel controls Switch the player to standby then, using the front panel controls, press STANDBY/ON while pressing to switch the player back to "Interlace". • If the player is connected using HDMI, disconnect the HDMI cable before resetting the player to interlace output. (If left connected, the HDMI output resolution will be reset to its default-see Resetting the output resolution to the default setting with HDMI connection on page 22.) STANDBY/ON Note: • If you connect a TV that is not compatible with a pro- gressive scan signal and switch the player to progressive, you will not be able to see any picture at component out. In this case, switch everything off and reconnect using the supplied video cable, then switch back to "Interlace". Compatibility of this player with progressive-scan and high-definition TVs This player is compatible with progressive video Macro Vision System Copy Guard. Consumers should note that not all high-definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user switch the connection to the "standard definition" output (Interlace). If there are questions regarding our TV set compatibility with this model, please contact our customer service center. 20