Onkyo HTSP908 Owner Manual - Page 58
The DV-SP405 displays
UPC - 751398007866
View all Onkyo HTSP908 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
DV-SP405_En.book Page 58 Tuesday, May 29, 2007 2:48 PM Troubleshooting-Continued DVD Player Symptoms Brightness is unstable or the picture is noisy? Chapters or tracks don't play in the correct order? Buttons on the DV-SP405 and remote controller don't work? No sound? The picture appears stretched or the wrong shape? Audio CD playback skips or jumps or is noisy? An audio CD is loaded but the DV-SP405 displays "NO DISC"? The first track doesn't play? Locating a specific point takes longer than usual? Playback starts in the middle of a track? Some sections of a track are skipped? Playback stops in the middle of a track? The DV-SP405 displays the wrong messages? Causes The DV-SP405 is connected to your TV via a VCR or other video equipment and a copy-protection system is affecting the picture. Your TV doesn't support progressive scanning. Remedies Connect the DV-SP405 directly to your TV (page 19). Reset the DV-SP405 to its initial settings (page 44). You are using repeat playback, program playback, or random playback. Select normal playback (pages 35-37). Power supply voltage fluctuations and other anomalies, such as static electricity, can interfere with normal operation. Turn off the DV-SP405, wait five seconds, then turn it on again. If that doesn't resolve the issue, disconnect the power cord from the wall outlet, wait five seconds, reconnect it, then try again. The "96 kHz PCM Out" setting is set to Change the "96 kHz PCM Out" setting to "96kHz "96kHz". > 48kHz", or use analog connections (page 45). The "Digital Out" setting is set to "Off". Change the "Digital Out" setting to "On" (page 45). The wrong input source is selected on your TV, hi-fi amp, or AV receiver. On your TV, hi-fi amp, or AV receiver, select the input to which the DV-SP405 is connected. The audio cable is not connected properly. Check the audio cable and correct as necessary. The TV, hi-fi amp, or AV receiver connected to the DV-SP405's audio outputs is Turn on the TV, hi-fi amp, or AV receiver and set its volume as appropriate. either not on or its volume is turned down. A DV-SP405 "Digital Audio Out" setting Check the "Digital Audio Out" settings and cor- is set incorrectly. rect as necessary (page 45). Playback is paused. Resume playback (page 28). The "TV Screen" setting is wrong. Set the "TV Screen" setting to match the aspect ratio of your TV (page 46). The loaded audio CD uses copy control. Copy-controlled CDs are special discs that don't conform to the audio CD standard and, therefore, may not work properly with the DV-SP405. 58