Onkyo HTSP908 Owner Manual - Page 21

DV-SP405_En.book Page 21 Tuesday, May 29, 2007 2:48 PM Connecting the DV-SP405-Continued Connecting Your TV • Connect the DVD Player to the TV directly. If you connect the DVD Player to a VCR, TV/VCR combination, or video selector, the playback picture may be distorted as DVD videos are copy protected. Using S-Video (not European model) If your TV (or other equipment) has an S-Video input, you can use this instead of the standard (composite) output for a better quality picture. • Use an S-Video cable (not supplied) to connect the S VIDEO OUTPUT to an S-Video input on your TV (or monitor or AV receiver). Line up the small triangle above the jack with the same mark on the plug before plugging in. Note: • To set up the player for use with a progressive scan TV, see "Video Output settings - Component Out" on page 46. Using SCART (European model only) If your TV has a SCART-type AV input, you can use a SCART cable to connect this player to your TV. This type of connection carries both the sound and the picture, so there's no need to connect up the AUDIO OUTPUT L/R and VIDEO OUTPUT jacks. • Use a SCART cable (not supplied) to connect the AV CONNECTOR to an AV input on your TV. 405 405 TV S VIDEO IN Using Component Video You can use the component video output instead of the standard video out jack to connect this player to your TV (or other equipment). This should give you the best quality picture from the three types of video output available. • Use a component video cable (not supplied) to connect the COMPONENT VIDEO OUTPUT jacks to a component video input on your TV, monitor or AV receiver. DIGITAL COAXIAL AUDIO OUTPUT ANALOG L 405 R TV SCART This connector can output composite video, or RGB video. The default setting is composite, which should work with all TVs. Consult the manual that came with your TV to see if you can use one of the higher quality settings. See page 46 for how to change the video output. Y PB COMPONENT VIDEO IN PR TV 21