Onkyo TX-RZ830 Owners Manual - English - Page 10
Front Panel, Remote
View all Onkyo TX-RZ830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 1. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals with a digital optical cable or digital coaxial cable. 2. TUNER AM/FM terminal: Connect the supplied antennas. 3. COMPONENT VIDEO IN jacks: Input AV component video signals with a component video cable. (Compatible only with 480i or 576i resolution.) 4. Wireless antenna: Used for Wi-Fi connection or when using a BLUETOOTH- enabled device. Adjust the angles according to the connection status. 5. USB port: Connect a USB storage device to play music files. ( p83) You can also supply power (5 V/1 A) to USB devices with a USB cable. 6. ETHERNET port: Connect to the network with a LAN cable. 7. VIDEO IN jacks: Input AV component video signals with an analog video cable. 8. RS-232C port: Connect a home control system equipped with an RS-232C port. For adopting a home control system, contact the specialized stores. 9. HDMI OUT jacks: Transmit video signals and audio signals with an HDMI cable connected to a monitor such as a TV or projector. 10. HDMI IN jacks: Transmit video signals and audio signals with an HDMI cable connected to an AV component. 11. AC INLET: Connect the supplied power cord. 12. GND terminal: Connect the ground wire of the turntable. 13. 12V TRIGGER OUT jack: Connect a device equipped with a 12V trigger input jack to enable power link operation between the device and this unit. ( p72) 14. AUDIO IN jacks: Input TV or AV component audio signals with an analog audio cable. 15. IR IN port: Connect a remote control receiver unit.( p71) 16. SPEAKERS terminals: Connect speakers with speaker cables. (North American models support banana plugs.) 17. PRE OUT jacks: Connect a power amplifier. ( p57) 18. SUBWOOFER PRE OUT jacks: Connect a powered subwoofer with a subwoofer cable. Up to two powered subwoofers can be connected. The same signal is output from each SUBWOOFER PRE OUT jack. 19. ZONE 3 PRE/LINE OUT jacks: Output audio signals with an analog audio cable connected to a pre-main amplifier or a power amplifier in a separate room (ZONE 3). HEIGHT 2 PRE OUT jacks: Connect a power amplifier. ( p57) 20. ZONE 2 PRE/LINE OUT jacks: Output audio signals with an analog audio cable connected to a pre-main amplifier or a power amplifier in a separate room (ZONE 2). 10 Front Panel≫ Rear Panel≫ Remote≫