Onkyo TX-RZ830 Owners Manual - English - Page 136
Dolby Enabled Speaker, Equalizer Settings
View all Onkyo TX-RZ830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 5. Dolby Enabled Speaker Change the settings of Dolby Enabled Speakers. Setting Item Default Value Dolby Enabled 6.0 ft/1.80 m Speaker to Ceiling AccuReflex Off Setting Details Set the distance between the Dolby Enabled Speaker and the ceiling. Select between "0.1 ft/0.03 m" and "15.0 ft/4.50 m" (0.1 ft/0.03 m units). • The unit of distance (ft/m) is displayed using the unit selected for the "Distance" setting. You can enhance the reflection effect of Dolby Enabled Speakers from the ceiling. "Off": When this function is not used "On": When this function is used • This setting can be selected when "Configuration" - "Height 1 Speaker"/"Height 2 Speaker" is set to "Dolby Speaker". 6. Equalizer Settings You can adjust the output volume of the range for each connected speaker. Adjust the volume of different sound ranges for each speaker. You can set three different equalizers in Preset 1 to 3. The number of frequencies that can be selected for each speaker is up to five bands for the Subwoofer and nine bands for the other speakers. Setting Item Front Center Default Value 0.0 dB 0.0 dB Setting Details After selecting the speaker frequency between "25 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / . After selecting the speaker frequency between "25 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / . Setting Item Height 1 Height 2 Surround Surround Back Subwoofer Default Value 0.0 dB 0.0 dB 0.0 dB 0.0 dB 0.0 dB Setting Details After selecting the speaker frequency between "25 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / . • Depending on the use of the ZONE speakers, it may not be possible to select this setting. After selecting the speaker frequency between "25 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / . • Depending on the use of the ZONE speakers, it may not be possible to select this setting. After selecting the speaker frequency between "25 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / . After selecting the speaker frequency between "25 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / . • Depending on the use of the ZONE speakers, it may not be possible to select this setting. After selecting the speaker frequency between "25 Hz" and "160 Hz" with the cursors / , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / . • This cannot be selected if "Configuration" - "Subwoofer" is set to "No". • Depending on the input source or listening mode setting, the desired effect may not be achieved. 136 Front Panel≫ Rear Panel≫ Remote≫