Onkyo TX-SR393 AV Receiver Owners Manual - English - Page 70
Audio Adjust, Multiplex/Mono, Dolby, LFE Level
View all Onkyo TX-SR393 AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 3. Audio Adjust 1. Multiplex/Mono Change the settings of multiplex audio playback. Setting Item Multiplex Input Channel Mono Input Channel Default Value Main Left + Right Setting Details Set the audio channel or language to be output when playing multiplex audio or multilingual broadcasts, etc. "Main": Main channel only "Sub": Sub channel only "Main/Sub": Main and sub channels are output at the same time. • For multiplex audio broadcasts, pressing the button on the remote controller will display "1+1" on the main unit's display. Set the input channel to play 2-ch digital sources such as Dolby Digital, or 2-ch analog/PCM sources in the Mono listening mode. "Left": Left channel only "Right": Right channel only "Left + Right": Left and right channels 2. Dolby Change the setting of when Dolby signals are input. Setting Item Loudness Management Default Value On Setting Details When playing Dolby TrueHD, enable the dialog normalization function which keeps the volume of dialog at a certain level. Note that when this setting is Off, the Late Night function that allows you to enjoy surround at low volumes is fixed to off when playing Dolby Digital Plus/Dolby TrueHD. "On": When this function is used "Off": When this function is not used 3. DTS Change the setting of when DTS signals are input. Setting Item DTS Auto Surround Dialog Control Default Value On 0 dB Setting Details When inputting DTS signals that include extended channel information, the optimum listening mode is automatically selected according to the extended information contained in the input signal and the speaker configuration of this unit when playing in the straight decoding listening mode. "On": When this function is used "Off": Audio is played using the same number of channels in the input signal according to the speaker configuration of this unit. You can increase the volume of dialog portion of the audio up to 6 dB by 1 dB step so that you can hear the dialog easily in noisy atmosphere. • This cannot be set for content other than DTS:X. • Depending on the content, this function may not be selected. 4. LFE Level Set the low-frequency effect (LFE) level for Dolby Digital series, DTS series, Multichannel PCM, and DSD signals. Setting Item LFE Level Default Value 0 dB Setting Details Select the low-frequency effect (LFE) level of each signal from "0 dB" to "-∞ dB". If the low-frequency effect sound is too strong, select "-20 dB" or "-∞ dB". 70 Front Panel≫ Rear Panel≫ Remote≫