Onkyo TX-SR393 AV Receiver Owners Manual - English - Page 81

Contents ≫ Connections ≫ Playback ≫ Setup ≫ Troubleshooting „„Tuner 87 „„BLUETOOTH function 87 Before starting the procedure „„ZONE B function 88 Problems may be solved by simply turning the power on/off or disconnecting/ connecting the power cord, which is easier than working on the connection, „„Remote Controller 88 setting and operating procedure. Try the simple measures on both the unit and the connected device. If the problem is that the video or audio is not output or the „„Display 88 HDMI linked operation does not work, disconnecting/connecting the HDMI cable „„Others 88 may solve it. When reconnecting, be careful not to wind the HDMI cable since if wound the HDMI cable may not fit well. After reconnecting, turn off and on the unit and the connected device. • The AV receiver contains a microPC for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely event that this happens, unplug the power cord from the wall outlet, wait at least 5 seconds, and then plug it back in. • Our company is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit's malfunction. Before you record important data, make sure that the material will be recorded correctly. When the unit is operating erratically 82 Try restarting the unit 82 Resetting the unit (this resets the unit settings to the default) 82 Troubleshooting 83 „„Power 83 „„Audio 83 „„Listening Modes 85 „„Video 86 „„Linked operation 86 81 Front Panel≫ Rear Panel≫ Remote≫