Optoma TW766W User's Manual - Page 58
Lamp Replacement Procedure
UPC - 796435411237
View all Optoma TW766W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Appendices 1 The screws on the lamp cover and the lamp cannot be removed. The projector cannot be turned 3 2 on if the lamp cover has not been placed back on the projector. Do not touch the glass area of the lamp. Hand oil can cause the lamp to shatter. Use a dry cloth to clean the lamp module if it was accidentally touched. Lamp Replacement Procedure: . Switch off the power to the projector by pressing the " " button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Lift up and remove the cover. 5. Unscrew the three screws on the lamp module. 2 6. Lift up the lamp handle and remove the lamp module slowly and carefully. 3 To replace the lamp module, reverse the previous steps. 7. Turn on the projector and use "Lamp Reset" after the lamp module is replaced. Lamp Reset: (i) Press "MENU" (ii) Select "OPTIONS" (iii) Select "Lamp Settings" (iv) Select "Lamp Reset" (v) Select "Yes". English 58