Optoma ZH406ST GT1090HDR_UM - Page 47
Setup test pattern menu, Setup remote settings menu, Setup projector ID menu, Setup 12V trigger menu
View all Optoma ZH406ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
SETUP AND INSTALLATION Setup test pattern menu Test Pattern Select the test pattern from green grid, magenta grid, white grid, white, or disable this function (off). Setup remote settings menu IR Function Set the IR function setting. On: Choose "On", the projector can be operated by the remote control from the top and front IR receivers. Off: Choose "Off", the projector can't be operated by the remote control. By selecting "Off", you will be able to use the Keypad keys. Remote Code Set the remote custom code by pressing the remote ID button for 3 seconds and you will notice the remote indicator (above the Off button) starts blinking. Then, input a number between 00-99 using the keyboard numbered keys. After inserting the number, the remote indicator blinks twice quickly indicating that the remote code has changed. F1/F2/F3 Assign the default function for F1, F2, or F3 between Test Pattern, Brightness, Contrast, Sleep Timer, Color Matching, Color Temp, Gamma, Projection, or MHL. Setup projector ID menu Projector ID ID definition can be set up by menu (range 0-99), and allow user control an individual projector by using RS232 command. Setup 12V trigger menu 12V Trigger Use this function to enable or disable the trigger. Off: Choose "Off" to disable the trigger. On: Choose "On" to enable the trigger. Reserved IR_IN & detect GND English 47