Panasonic 26PEU1U6 Installation Instructions - Page 31
Suspending the Indoor Unit
View all Panasonic 26PEU1U6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
3-23. Suspending the Indoor Unit Depending on the ceiling type: • Insert suspension bolts as shown in Fig. 3-58 or • Use existing ceiling supports or construct a suitable support as shown in Fig. 3-59. WARNING It is important that you use extreme care in supporting the indoor unit inside the ceiling. Ensure that the ceiling is strong enough to support the weight of the unit. Before hanging the unit, test the strength of each attached suspension bolt. (1) When placing the unit inside the ceiling, determine the pitch of the suspension bolts referring to the dimensional data on the previous page. (Fig. 3-57) Tubing must be laid and connected inside the ceiling when suspending the unit. If the ceiling is already constructed, lay the tubing into position for connection to the unit before placing the unit inside the ceiling. (2) Screw in the suspension bolts allowing them to protrude from the ceiling as shown in Fig. 3-58. (Cut the ceiling material, if necessary.) (3) Thread the 2 hexagonal nuts and washers (field supply) onto the 4 suspension bolts as shown in Figs. 3-60 and 3-61. Use 2 sets of nuts and washers (upper and lower), so that the unit will not fall off the suspension lugs. Hole-in-anchor Hole-in-plug Concrete Insert Suspension bolt (M10 or 3/8") (field supply) Fig. 3-58 Ceiling tiles Ceiling support Fig. 3-59 Nuts and washers (2 sets) Suspension bolt Suspension lug Upper Lower Fig. 3-60 Suspension bolt Hexagonal nut Fig. 3-61 31 1BOBTPOJD@1"$J@*OEPPS6OJU@64MF